350F (175C) Fluid Temperature
2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump
Self-prime greater than three feet.
Hardened Bronze Gear Pump Rotors
10,000 Hour Rated Dual Hybrid Ball Bearings
10,000 Hour Rated Over-sized Brushes
Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings
Black Anodized Extruded Aluminum Bracket/Heatsink
Nickel-plated Pump Head
Stainless Steel Pump Head Fasteners
3/8" NPT Female Threaded Pump Head Ports
Set of two 3/8” NPT -> AN Nickel-plated Adapters Included
High-Temperature Power Wiring
Rubber-isolated Mounting Bracket
6 lbs Total Weight, 3” Diameter Motor
Reversible Pump Flow via Power Polarity Reversal
Not designed for use as a fuel pump
Warrant void if 350F (175C) rated temperature is exceeded.
Rated voltage may be exceeded by up to 25%. Warranty void if applied voltage exceeds 25% of rated voltage as labeled.
Operating Current: 12 VDC version is <5A, 20A maximum. Pump MUST be protected by circuit breaker or fuse - 12V pump 20A. A fuse or circuit breaker will protect the pump from permanent damage in case of rotor-lock from ingesting foreign debris. When the temperature of the oil is very low, the oil’s viscosity is much greater, and the pump will consume more current until the oil warms up. The fuse or circuit breaker current value takes into account the additional current needed for pumping oil at low temperatures. As a pressure-pump, the pumps are rated min. 50PSI. Exceeding any of these ratings will void warranty. (50-75PSI operation range is possible, but not guaranteed or warranted).
Two-year Warranty - warranty void if pump is modified, or current ratings exceeded. Warranty only for genuine TurboWerx products purchased from Pro Line Racing. No user-serviceable parts within the pump, warranty void if pump is opened. Do not remove or replace ANY fasteners.