Proven, powerful, and quiet. This custom engineered pump is designed to scavenge hot turbocharger drain oil from anywhere to anywhere in automotive applications. Time-tested, proven reliability over years, and with its 1.75GPM (105GPH) scavenging capacity, it is powerful enough to scavenge oil from two turbos. It will self-prime/draw from over 5 vertical feet, and pump the oil as high as 20 vertical feet. The Exa-Pump-inspired custom black anodized finned heatsink lowers operating temperature, further enhancing reliability.
Whether the application moves 1 oz of oil a minute or up to 1.75 gallons a minute, 'under-flow' applications are no problem. In fact, the TurboWerx pump may be run dry indefinitely. May be operated up to 60PSI pressure.
Same style/performance heatsink as Exa-Pump!
This pump will fit inside a 7.25" x 4.0" x 4.0" box. It weighs less than 5 pounds, and includes anti-vibration mounting hardware. It is specified to handle a maximum oil temperature of 300+F, and the power consumption at 12 volts is less than 3.5 amps. Pump inlet and outlet fittings are standard 3/8" NPT. Also suitable for other fluids, such as rear-end, engine coolant, and water. Not compatible with ATF.
This pump is an ideal economical solution for most turbocharger scavenge applications. For higher performance and even greater reliability, see the premium model Exa-Pump here.
TurboWerx offers a limited warranty on the parts against defects in material and workmanship. Do not remove or replace ANY fasteners. Warranty and terms of sales. Do not exceed 60PSI operating pressure. or 300F rated temperature, or >25% rated voltage (12V), else warranty voided.
*The #1 cause for pump failure is ingesting foreign debris. Gear pumps of any brand are especially susceptible. TurboWerx offers a several filter solutions to prevent this.
Pumping Rate: 1.75GPM (105GPH) @ 12.8 volts.
Maximum Fluid Temperature: 300F (149C)
Current consumption: 3.5 amps maximum
Inlet/Outlet fittings: 3/8” NPT F
Dimensions: 7.0” x 4.5” x 4.0”
Weight: 5 lbs