TURBOWERX BASE 12V - ELECTRIC OIL SCAVENGE PUMP


  • Proven, powerful, and quiet. This custom engineered pump is designed to scavenge hot turbocharger drain oil from anywhere to anywhere in automotive applications. Time-tested, proven reliability over years, and with its 1.75GPM (105GPH) scavenging capacity, it is powerful enough to scavenge oil from two turbos. It will self-prime/draw from over 5 vertical feet, and pump the oil as high as 20 vertical feet. The Exa-Pump-inspired custom black anodized finned heatsink lowers operating temperature, further enhancing reliability.

    Whether the application moves 1 oz of oil a minute or up to 1.75 gallons a minute, 'under-flow' applications are no problem. In fact, the TurboWerx pump may be run dry indefinitely. May be operated up to 60PSI pressure.

    Same style/performance heatsink as Exa-Pump!

    This pump will fit inside a 7.25" x 4.0" x 4.0" box. It weighs less than 5 pounds, and includes anti-vibration mounting hardware. It is specified to handle a maximum oil temperature of 300+F, and the power consumption at 12 volts is less than 3.5 amps. Pump inlet and outlet fittings are standard 3/8" NPT. Also suitable for other fluids, such as rear-end, engine coolant, and water. Not compatible with ATF.

    This pump is an ideal economical solution for most turbocharger scavenge applications. For higher performance and even greater reliability, see the premium model Exa-Pump here.

    TurboWerx offers a limited warranty on the parts against defects in material and workmanship. Please contact Turbowerx for any Warranty Claims directly at sales@turbowerx.com with invoice showing date of purchase. Do not remove or replace ANY fasteners. Warranty and terms of sales. Do not exceed 60PSI operating pressure. or 300F rated temperature, or >25% rated voltage (12V), else warranty voided.

    Specifications
    100% duty-cycle brushed motor with 2000 hr (minimum) brushes
    Pumping Rate: 1.75GPM (105GPH) @ 12.8 volts.
    Maximum Fluid Temperature: 300F (149C)
    Current consumption: 3.5 amps maximum
    Inlet/Outlet fittings: 3/8” NPT F
    Dimensions: 7.0” x 4.5” x 4.0”
    Weight: 5 lbs

    Base-Model Manual PDF

  • Turbowerx Pump Comparison
    • All pumps can be mounted in any orientation
    • All pumps are self-priming greater than three feet
    • EXA pumps are capable of reversible flow via Power Polarity Reversal
    • EXA - 6 lbs Total Weight, 3" Diameter Motor 
    • EXA Mini - 4 lbs Total Weight, 2” Diameter Motor 
    • Base - 5 lbs Total Weight, 3" Diameter Motor
    • Avoid locations that expose it directly to excessive water splashing

    EXA-Pump / TWX-300-12V 
    • Is the ultimate achievement in high-temperature, high-reliability rugged spur gear technology
    • Hardened Bronze Gear Pump Rotors
    • 10,000-hour rated High Temp dual ball bearings & over-sized brushes  
    • Rugged spur gear technology
    • 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump
    • 350F (175C) Fluid Temperature
    • Current consumption for the 12V version is less than 5 amps, 20 amp max  
    • Two 3/8” NPT, -8AN Nickel-plated Adapters Included
    • Can run with no flow for short-durations without issue.  A splash of fluid flow every ~10 minutes to re-wet pump internals will allow indefinite operation
    • Do not exceed 50PSI operating pressure. Do not apply >25% rated voltage (12V)  

    EXA-Pump Mini / TWX-200M-12V
    • Offers the exact same high-temp, high-reliability pump technology in a smaller form-factor more suitable to physically tighter applications    
    • 2GPM Scavenge Pump Rate depending on oil temperature/viscosity, 30+ PSI continuous as Pressure Pump
    • 10,000 Hour Rated Dual Hybrid Ball Bearings
    • Low-cost, Easily Replaceable External 4,000 Hour Rated Brushes
    • Current consumption for the 12V version is less than 5 amps, 15 amp max    
    • Two 3/8” NPT, -8AN Nickel-plated Adapters Included  
    • Can run with no flow for short-durations without issue.  A splash of fluid flow every ~10 minutes to re-wet pump internals will allow indefinite operation  
    • Do not exceed 30PSI operating pressure. Do not apply >25% rated voltage (12V)   

    Base-Model Pump / TWX-175-12V
    • This pump is an ideal economical solution for most turbocharger scavenge applications.
    • 100% duty-cycle brushed motor with 2,000 hr (minimum) brushes 
    • Has a triple Viton valve/diaphragm set-up with standard sealed bearings 
    • 1.75 GPM Scavenging capacity
    • Maximum oil temperature of 300F
    • Current consumption for the 12V version is less than 3.5 amps
    • Standard 3/8" NPT female and two high-temperature -8AN adapters made of PA66-GF30 (polyamide with 30% glass fiber) are included.
    • Can run dry indefinitely
    • Not compatible with ATF, Do not exceed 60PSI operating pressure. Do not apply >25% rated voltage (12V)


Related Items